These cable terminations are suitable to be installed on single-stranded cables and are used in indoor spaces where they have no direct contact with wind, rain or snow.
- Room temperature ranging from -40 to +105 °C
- Cross-linked insulation
- Flame retardant
- Easy installation
- In accordance with CENELEC HD 629.1S1, DIN VDE 0278, IEC60502-4 Standard
- With UV protection layer
- With unlimited lifetime / energized as soon as it is installed on the cable
- Occupies less space
To order a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.
For instance:
Indoor single core cable termination for a voltage of 24kv with 185 mm2 cross section and HCK – 1I24 – 185BI bimetal cable lug
- Insulating tubing
- Stress control tubing (shrinkable or push-on)
- Yellow tape
- Red tape
- Medium voltage cable lug
- Earth cable lug
- Installation manual
- Rain shed
- Armor kit (if the cable is armored)
- Earth kit (if the earth is tape shield)
- Angle boot (if needed based on the specifications of the electrical panel)
HCK – 1I cable terminations have all the properties of HSK – 1I cable terminations. The difference is that they are designed and manufactured in smaller scales and are used for electrical panels with small dimensions or electromotor cable box that are built to meet IP55 or higher standards and have small space for installation of cable termination.
| X = cable cross-section (mm2) Y= (A1/Cu/BI) Type of cable lug |
| Length (mm) (H) | Cable cross-section (mm2) | Code | Uo (kV) |
Un (kV) |
Um (kV) |
| 170 | 6 – 1200 | HCK – 1I03 – XY | 1.9 | 3 | 3.3 |
| 170 | 6 – 1200 | HCK – 1I07 – XY | 3.3 | 6 | 7.2 |
| 200 | 10 – 1200 | HCK – 1I12 – XY | 6 | 10 | 12 |
| 220 | 10 – 1200 | HCK – 1I17 – XY | 7.2 | 11 | 17.5 |
| 220 | 10 – 1200 | HCK – 1I24 – XY | 12 | 20 | 24 |
| 370 | 10 – 1200 | HCK – 1I36 – XY | 19 | 33 | 36 |